Emulex LP9802DC-F2

Цена: 154430 р
Наличие: Под заказ
Производитель:EMULEX
Emulex LP9802DC-F2

Emulex LP9802DC-F2

The LP9802DC Dual Channel PCI-X host bus adapter offers two independent 2GB/s Fiber Channel HBA interfaces in a single PCI-X slot. It delivers exceptional performance through the use of two Emulex Pegasus ASICs, two 266MIPS onboard processors and high-speed memory. The LP9802DC features automatic speed negotiation, which allows complete compatibility with existing 1GB/s Fiber Channel SANs, while allowing seamless upgrades to higher speed 2GB/s SANs. The LP9802DC provides the functionality of two of Emulex's high performance PCI-X 133 MHz HBAs integrated onto one board, which provides bus compatibility with PCI-X or PCI 2.2 based systems. This provides the flexibility and broad interoperability needed for complex, highly scalable SANs. The LP9802DC provides a combination of features, including switched fabric support using F Port and FL Port connections, full-duplex data transfers, high data integrity features, support for all Fiber Channel topologies, and support for service classes and, in a dual channel HBA. The LP9802DC also features sophisticated hardware that provides superior performance in SANs, delivering low latency and high throughput in switched fabric, arbitrated loop and clustered environments. Support for fiber optic cabling is provided through an embedded small form factor (LC) optical interface.

Особенности
  • Two full duplex 2Gb/s Fibre Channels deliver up to 800MB/s link bandwidth
  • Automatic speed negotiation
  • Automatic topology detection
  • Full fabric support using F_Port and FL_Port connections
  • Onboard hardware context cache for superior fabric performance
  • Support for multiple concurrent protocols (SCSI and IP)
  • Full support for both FC service class 2 and 3
  • Full fabric boot support in x86 and SPARC environments to multiple LUNs
  • Support for FCP-2 (FC-Tape) devices
  • 66/100/133 MHz PCI-X 1.0a and PCI 2.2 compatibility
  • End-to-end parity protection for high data integrity
  • Robust suite of software including IP and storage protocols under Windows Server 2003, Windows 2000, Windows NT, Linux, NetWare, HP-UX and Solaris
  • Optical small form factor (LC) interface support
Технические характеристики
Product Description Emulex LP9802DC - network adapter - 2 ports
Device Type Network adapter
Form Factor Plug-in card
Interface (Bus) Type PCI-X / 133 MHz
Data Link Protocol Fibre Channel
Data Transfer Rate 2.12 Gbps
Processor Clock Speed 266 MHz
Memory 1 MB
System Requirements SunSoft Solaris, HP-UX, Novell NetWare, Linux, Microsoft Windows 2000 / NT4.0
Manufacturer Warranty 3 years warranty
Device Type Network adapter - 2 ports
Form Factor Plug-in card
Interface (Bus) Type PCI-X / 133 MHz
Connectivity Technology Wired
Data Link Protocol Fibre Channel
Fibre Channel FC-AL, FC-FLA, FC-FS, FC-PH, FC-PLDA
Data Transfer Rate 2.12 Gbps
Status Indicators Transmit, receive
Features Auto-negotiation
Processor 2 - MIPS
Processor Clock Speed 266 MHz
RAM 1 MB
Flash Memory 2 MB
Provided Interfaces 2 x network - FC-AL short-wave - LC multi-mode x 2
Compatible Slots 1 x PCI-X / 133 MHz
Software Included Drivers & Utilities
Min Operating Temperature 32 °F
Max Operating Temperature 113 °F
Humidity Range Operating 5 - 95%
Burst Transfer Rate 2 GBps
Cache Memory 2 MB
Connector Style SFP (Small Form Factor Pluggable)
Controller Primary Interface Fibre Channel
Manufacturer Emulex
Number of Channels 2
Onboard Processor ASIC
Primary Devices Supported 126 (FC)
Primary Port Placement External
Quantity Single Pack
Type Slot/Interface 64-bit PCI-X (133 MHz)