Paralan Ultra320 LVD to HVD

• Convert Between All Versions of LVD/MSE/SE/HVD
• Extend LVD/MSE/SE/HVD Bus Length
• Isolate HVD Segments of a SCSI bus
• Targets and initiators may be located on both sides of the Expander
• The models are backward compatible with older versions of SCSI
• Does not consume a SCSI ID
• Stand-alone and Board-level Versions:

Interconnect HVD and Ultra320 Devices

Paralan's models MH32A / MH33A let you add U320 devices into an existing High Voltage Differential (HVD) system, or utilize existing HVD devices in an Ultra320 or single-ended system. All this is accomplished without any impact on SCSI protocol or loss of data thruput.

Using Ultra320 Devices in an Existing HVD System

SCSI protocol allows all SCSI implementations i.e. LVD/SE and HVD to communicate in the same SCSI domain. This is accomplished through the use of the DIFFSENSE signal. However, the performance level is reduced by the slower devices on each segment. This huge penalty is avoided by using a type of SCSI Expander usually referred to as a Converter. As an example; a SCSI converter is placed between an Ultra 320 device and an HVD device. This isolates the different versions of SCSI into two segments allowing the both the Ultra320 devices and the HVD devices to function at their full throughput.

Using HVD (High Voltage Differential) Devices in an Ultra320 System

HVD Devices can be added to an Ultra320 or Single-ended system simply by adding a Ultra320 to HVD Converter, attaching the HVD SCSI segment to the HVD port of the Converter. The converter will not consume a SCSI ID, and the system will operate with no compromise of thruput.

Mixing SCSI Device Types

Multimode LVD SCSI will automatically change to Single-Ended (SE) if an SE device is on the same bus segment. However, neither LVD nor SE SCSI can directly communicate with HVD SCSI. A Model MH32A or MH33A Ultra320 to HVD SCSI Converter enables this type of communication by converting the Ultra320 or SE SCSI to HVD or vice versa. The presence of a SCSI Converter will not decrease data thruput.

Paralan Model MH32A and MH33A LVD/MSE to HVD SCSI Converters are completely compatible with all devices that conform to the full ANSI X3T10 standard through SPI-4 (Ultra320). They are available either as stand-alone units utilizing line voltage, or as board-level units for installation in other equipment.

Isolation for Hot Swapping

The logical isolation between the two sides of a SCSI Converter allows a device on one side to be disconnected without disturbing the other side.

Specifications:

Ordering Guide: