Infortrend Дисковый массив EonStor F12F-G2A2-M2 FC-to-FC, 2U, 12-Bay rackmount

Дисковый массив Infortrend F12F-G2A2-M2 12-дисков, внешний интерфейс 2x2Gb/s FC порта, интерфейс дисков FC, корпус 2U, уровни RAID: 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, 1xRAID контроллер, 1 модуль памяти 256MB, 2 модуля источников питания.

RAID
  RAID- контроллер высотой 2U встраиваемый в стойку, имеет 12 корзин для жестких дисков. Одна плата контроллера. Четырех портовый FC канал со скоростью 2G (2 . внешних, 2 - внутренних). Память 256MB (SDRAM). Два блока питания с тройной системой охлаждения. Одна LCD панель. Процессор ASIC 133.

Multiple arrays configurable with dedicated or global hot spares
  RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD
  Online expansion by
  Adding new drives
Copying and replacing drives with drives of larger capacity
 
  Automatic background rebuild
  Configurable stripe size and write policy per array
  Intelligent Drive Handling
  In degraded mode: Skipping irreparable blocks to continue rebuild
In normal operation: Data block verification and repair
 
  System Components
  Redundant, hot-swappable components, designed for no single point of failure
  2U RAID enclosure
Single RAID controller
12 drive trays
Dual redundant power supplies
2 hot-swappable fan modules
 
  Management
  Firmware-embedded Java-based GUI RAID manager
  Centralized management of multiple arrays over in-band or Ethernet
  Real-time event notification over Email, LAN broadcast, or SNMP traps
  Auto on-lining of cascaded enclosures 
  SES modules on JBODs
  SNMP 2.0 MIBs with get and set commands
  Firmware-embedded utility via LCD keypad or RS-232C port
  Drive Interface
  Up to 1024 LUNs if sufficiently large memory is used with the proper settings
  3.5", 1" high disk drives
  12 hot-swappable drive trays
  Automatic bad sector reassignment
  Drive hot-swappable via SCA-II connectors
  Single dual loop across 12 drives within enclosure
  Host Interface
  Auto-negotiate FC-AL, point-to-point, and switched fabric
  Concurrent I/O commands
  Tagged Command queuing up to 256
  Variable stripe size per logical drive
  Optimization setting for random or sequential I/Os
  Maintenance & Availability
  Optional Li-ion battery support
  Immediate array availability
  Drive roaming, array configuration on drives
  Auto switch cache policy and Auto shutdown
  When a RAID controller detects conditions exceeding preset thresholds, the following actions will be exerted to protect the hardware:
Automatically flush cached data and switch the array's caching mode from write-back to write-through
Commence an auto shutdown
What is remarkable is all environmental thresholds associated with this mechanism are user-configurable and that caching mode changes back to write-back once normal condition is restored.
Physical/Electrical
  Interfaces:
  4 SFP sockets using a short-wavelength adapter
One RS-232C (Audio Jack) serial port (38400, n, 8, 1)
One RJ-45 Ethernet port
 
  Power supply:
  2 redundant, hot-swappable power supplies with PFC
  Input: 90~260VAC, 47~63Hz
  Output: +5V, 25A max.; +12V, 24A max.; +3.3V, 20A max.; 350watts capacity
  Cooling fan
  3 cooling fans in three separate modules
  Operating temperature: 5 to 40°C
  Non-operating temperature: - 40º to 60ºC 
  Relative humidity: 10~95%, non-condensing
  Operating altitude: sea level to 10,000ft
  Dimensions:
Chassis dimensions: 88H x 446.2W x 486.5D mm
(w/ protrusions): 88H x 481W x 525D mm
Package dimensions: 344H x 600W x 670D mm
  System weight (w/o drives):
Net weight: 18kg
Gross weight: 25.5kg