Host Ports
(Dual Host Boards for One Controller)
|
- Onboard Gb/s ports
- Four 1Gb/s iSCSI ports (2 per controller)
- More host options:
- Pure options:
- Eight 16Gb/s Fibre Channel ports (4 per controller)
- Sixteen 8Gb/s Fibre Channel ports (8 per controller)
- Eight or sixteen 10Gb/s iSCSi ports/ SFP+ (4 or 8 per controller)
- Eight 12Gb/s SAS ports (4 per controller)
- Sixteen FCoE ports (8 per controller)
- Hybrid options**:
- Eight or sixteen 10Gb/s iSCSi ports/ SFP+ and eight 16Gb/s Fibre Channel ports
- Eight or sixteen 10Gb/s iSCSi ports/ SFP+ and eight 8Gb/s Fibre Channel ports
** Host board 1 and host board 2
|
Controller
|
Dual redundant controllers
|
Cache Memory
|
Default 8GB, up to 16GB, 32GB, 64GB, 128GB or 256GB
** Default installed memory may vary by model, region, and other factors. Contact our sales representatives for details.
|
Drive Connectivity
|
- 12Gb/s SAS connectivity
- S.M.A.R.T. support
- Automatic bad-sector reassignment
- Dedicated bandwidth to each connected drive
|
Supported Drives
|
- 2.5" SAS SSDs
- 2.5" SATA SSDs*
- 2.5" 10,000 RPM SAS drives
* MUX board required when using SATA drives
** For the latest compatibility details, please refer to the Compatibility Matrix.
|
Maximum Number of Drives
|
- Per system: 24
- Via JBOD: 444
|
Corresponding Expansion Enclosure
|
Please refer to datasheet
|
Rack Support
|
2U, 19-inch rackmount
|
RAID Functionality
|
- Global, dedicated or enclosure hot-spare
- RAID levels supported : RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60
- Online expansion by:
- Adding new drives
- Copying and replacing drives with drives of larger capacity
- RAID migration
- Configurable stripe size and write policy per system
- Intelligent drive handling
- In degraded mode: skips irreparable blocks to continue rebuild
- In normal operation: data-block verification and repair
|
Data Services
|
- Thin provisioning
- SSD Cache*
- SED (Self-encrypting drives)
- Automated storage tiering*
- Local replication**
- Snapshot
- Volume copy/ mirror
- Remote replication*
- Synchronous or asynchronous
* Optional
** Available with Standard license and optional Advanced license
|
Green Design
|
- 80 PLUS-certified power supplies delivering more than 80% energy efficiency
- Intelligent multi-level drive spin-down
|
Availability and Reliability
|
- Redundant, hot-swappable hardware modules
- CacheSafe technology
- Multi-pathing support (EonPath)
- Device mapper support
|
Notification
|
Various event notification methods including email, LAN broadcast, fax, SNMP trap and SMS.
|
Management
|
- Web-based SANWatch management software
- RS232 serial port for local access to firmware-embedded utility
- Automated cache flush and caching mode operation per enclosure status
- Telnet and SSH system monitoring via Ethernet
- Platform-independent firmware management GUI
- Module status LED indicators: component presence detection & thermal sensors via I2C bus
|
Service and Support
|
- Standard service: 3-year limited hardware/software warranty and 8x5 phone, web, and email support
- Upgrade/Extension service*: replacement part dispatch on the next business day (up to 5 years)
- Advanced Service: 24x7 phone, web and email support + onsite diagnostics on the next business day
- Premium Service: 24x7 phone, web and email support + onsite diagnostics in 4 hours
* Optional
** Service may vary by region
|
Power
|
- Power supplies: Two 530W
- AC voltage: 100VAC @ 10A to 240VAC @ 5A with PFC (auto-switching)
- Frequency: 50-60 Hz
|
Environmental
|
- Temperature:
- Operating: 0 to 40°C without BBU or CBM / 0 to 35°C with BBU or CBM
- Non-operating: -40 to 60°
- Altitude: Sea level to 3660m (12,000ft) operating / sea level to 12,192m (40,000ft) non-operating
- Relative humidity: 5 to 95% non-condensing, operating and non-operating
|
Regulatory
|
- Safty: UL, BSMI, CB, EAC
- Electromangnetic Campatibility: CE, BSMI, FCC, KC
|
Dimensions
|
448mm (W) x 88mm (H) x 500mm (D)
**Without chassis ears / protrusions
|
Weight
|
19.58kg/ 43.17lbs (without HDDs)
|
Package Dimensions
|
770mm (W) x 350mm (H) x 580mm (D)
|