Emulex Контроллер 10Gb/s PCIe dual channel FCoE 10GBase-CR (direct attach copper) (OCe10102-FX)

Standards

• ANSI INCITS T11 FC-BB-5 2.0, FC-PI-2, FC-GS-4, FC-TAPE, and FCP-3
• PCI Express base spec 2.0 PCI Bus Power Management Interface, rev. 1.2, Advanced Error Reporting (AER)
• IEEE 802.3ae (10Gb/s Ethernet), 802.1q (VLAN), 802.1p (QoS/CoS), 802.3ad (Link Aggregation), 802.3x (Flow Control)
• Enhanced Ethernet (draft): Enhanced Transmission Selection, ETS (P802.1Qaz); Priority-based Flow Control, PFC (P802.1Qbb); Data Center Bridging Capabilities eXchange Protocol, CIN-DCBX and
• CEE-DCBX (P802.1Qaz)
• PHP hot plug-hot swap

Architecture

• Dual-channel, 10Gb/s Ethernet Link speed
• PCIe Express 2.0 (x8, 5GT/s), MSI-X support
• Integrated data buffer and code space memory

FCoE Features

• Common driver for UCNAs and HBAs
• N_Port ID Virtualization (NPIV)
• Support for FIP and FCoE Ether Types
• Fabric Provided MAC Addressing (FPMA) support
• 1024 concurrent port logins (RPIs)
• 1024 active exchanges (XRIs) per port

Ethernet Features

• IPv4/IPv6 TCP, UDP checksum offload; Large Send Offload(LSO); Large Receive Offload; Receive Side Scaling (RSS); IPv4 TCP Chimney Offload
• VLAN insertion and extraction
• Jumbo frames up to 8000 Bytes
• Preboot eXecution Environment (PXE) 2.0 network boot support
• Interrupt coalescing
• Load balancing and failover support including adapter fault tolerance (AFT), switch fault tolerance (SFT), adaptive load balancing (ALB), teaming support and IEEE 802.3ad

Comprehensive OS Support

• Windows Server
• VMware ESX
• Red Hat Enterprise Linux Server
• Novell SUSE® Linux Enterprise Server
• Oracle Solaris

Hardware Environments

• x86, x64 processor family

Physical Media

• Copper
  • SFP+ Direct Attached Twin-Ax Copper interface
  • Standards compliant passive and active copper cables supported up to 5m
• Optical
  
  • Optics: 10GBASE-SR short wave lasers with LC type connector

Physical Dimensions

• Low profile with standard bracket (low-profile bracket available)

Environmental Requirements

• Operating temperature: 0° to 55° C (32° to 131° F)
• Storage temperature: -40° to 70° C (-40° to 158° F)
• Relative humidity: 5% to 95% non-condensing

Agency Approvals

• Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
• UL recognized to UL 60950-1 2^nd Edition
• CUR recognized to CSA22.2, No. 60950-1-07
• Bauart-certified to EN60950-1 2^nd Edition
• FCC Rules, Part 15, Class A
• ICES-003, Class A
• EMC Directive 2004/108/EEC (CE Mark)
  
  • EN55022, Class A
  • EN55024
• Australian EMC Framework (C-Tick Mark)
  • AS/NZS CISPR22, Class A

• VCCI (Japan), Class A
• KCC (Korea), Class A
• BSMI (Taiwan), Class A
• EU RoHS Compliant (Directive 2002/95/EC)
• China RoHS Compliant

Ordering Information

• OCe10102-FM
  • Dual-port, 10GBase-SR (short reach optical)
• OCe10102-FX
  • Dual-port, 10GBase-CR (direct attach copper)
    
    (Cables not included)